Features: In the single measurement mode of the instrument, after each measurement, the current probe settlement depth and water injection duration (current age) are directly displayed, which greatly improves the operation of manual recording time in the original test. Automatic test under the automatic determination of setting time of the instrument, the initial setting time and the final setting time can be automatically determined by inputting the water adding time of the sample, which greatly simplifies the work flow of the tester who needs to manually operate for a long time. Setting curve in the automatic determination of setting time of the instrument, directly view the settlement depth curve of the measuring needle, which is more conducive to the determination and research of the setting of the tested sample. High speed USB interface the instrument adopts USB-HID transmission mode, saving the trouble of installing driver. The instrument also supports USB2.0 full speed mode
Technical Parameter:
Technical standard:
Test Method for water consumption, setting time and stability of cement standard consistency (GB / T 1346-2011).
Metrological verification regulation:
Test Method for water consumption, setting time and stability of cement standard consistency (GB / T 1346-2011).
Effective length of consistency test rod: 50 ± 1mm.
Effective diameter of consistency test rod: ?10±0.05mm.
Effective length of initial setting / final setting test rod probe: 50 ± 1mm.
Effective diameter of initial setting / final setting test rod probe: ?1.13±0.05mm.
Consistency / initial setting / final setting test rod probe weight: 300 ± 1g.
Test mold height: 40 ± 0.2mm.
Inner diameter of test mold: ?65 ± 0.5mm (small), ?75 ± 0.5mm (large).
Thickness of glass base plate: 4.5 ± 0.2mm.
Instrument detection accuracy: ? 0.05mm.
Power supply and consumption: AC220V50HZ, 150W.
Storage capacity: 8 megabytes, which can store no less than 999 standard components.
Computer online communication: USB2.0 full speed mode, communication rate of 12mbps.
USB works in HID mode and can be installed without drive.
Working temperature: 5 ºC - 40 ºC.
Ambient humidity: ? 95% (relative humidity).
Weight: 10Kg.
