Features: The Hydraulics Bench formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the student to experiment with the problems presented by fluid mechanics. It an autonomous unit with tank and pump. Innovative water saving system consisting of a high-capacity sump tank and spillway that sends the excess of water back to the tank. Easy to access drain valve. The volumetric measuring tank have stepped to accommodate for low or high flow rates. A measuring cylinder is included in the supply for the measurement of very small flow rates. Level tube with scale that shows the water level in the upper tank. Flow adjusted by means of a membrane valve. Flow stilling baffle for reducing the turbulence rate. Specially designed channel, in the upper part, to support the modules on test. The modules are easily mounted on its top without the use of tools. Manufactured with corrosion resistant materials, ensuring a long and useful life of the unit. Cen
Technical Specifications:
Mobile hydraulic bench, made of fiberglass reinforced polyester, and mounted on wheels for its mobility.
Centrifugal pump Power: 0.37kW.
Flow rate & height: 30 - 80 l/min at 20.1 - 12.8m.
Single-phase 200VAC - 240VAC/50Hz.
Runner made of stainless steel.
Sump tank capacity: 165L-170L.
Small channel: 8L-9L.
Flow measurement: Volumetric tank, gauged from 0-7L for low flow values and from 0-40L for high flow values.
Control valve for regulating the flow.
Open channel to place the test module.
Measuring cylinder is provided for the measurement of small flow rates.
Remote hand-operating dump valve in the base of the volumetric tank.
