PLC Training Kit-SB-PLC-K1200

TECHNICAL SPECIFICATIONS:
Power Supply 24 V 5 A:
SITOP PSU100L 24 V/5 A stabilized power supply with input 120/230 V AC and output 24 V DC/5 A. Product family: 1-phase, 24 V DC.
Industrial Grade HMI or Higher Version: SIMATIC HMI KTP1200 Basic DP, 12" TFT display with 65536 colors, key/touch operation, PROFIBUS interface, configurable with WinCC Basic V13/STEP 7 Basic V13. Standard devices 2nd Generation or higher.
Industrial Grade PLC or Higher Version:
SIMATIC S7-1200 CPU 1215C compact CPU, DC/DC/relay with 2 PROFINET ports, onboard I/O including 14 DI (24V DC), 10 DO relay 2A, 2 AI (0–10 V), 2 AO (0–20 mA). Power supply 20.4–28.8 V DC, 200 KB program/data memory.
Accessories include:
Compact Switch Module for connecting S7-1200 and up to 3 nodes (10/100 Mbit/s), unmanaged switch with 4 RJ45 ports and LED diagnostics.
Digital Input Module SM 1221: 8 DI, 24 V DC Sink/Source.
Digital Output Module SM 1222: 8 DO, 24 V DC, transistor 0.5A.
SIM 1274 Simulator Module for CPU 1214/1215 with 14 input switches (24 V DC).
RS485 Modbus RTU Communication Board.
SIMATIC S7-1200 Communication Board CB 1241 RS485 supporting Freeport protocol.
Product family: CB1241 RS485 board.
VFD 0.75 kW MLFB:
INAMICS V20 drive, 200-240 V 1AC, 0.75 kW rated power, 150% overload for 60 sec, unfiltered. I/O includes 4 DI, 2 DO, 2 AI, 1 AQ. Supports USS/MODBUS RTU with built-in BOP. Protection IP20/UL Open. Size 68×142×128 mm.
Accessories include:
Circuit breaker size S00, A-release 9…12 A, N-release 163 A.
SINAMICS V EMC filter 200-240 V 1-phase AC, 18 A, size 59×155×53 mm.
LV HRC fuse element NH000, 16 A, gG, 500 V AC/250 V DC.
Analog Input 4 Channel Module:
SIMATIC S7-1200 SM 1231, 4 AI supporting ±10 V, ±5 V, ±2.5 V, or 0-20 mA/4-20 mA, 12-bit + sign (13-bit ADC).
Tektonika 5-Port Industrial Switch
Five RJ45 ports 10/100 Mbps, IEEE 802.3 standards (802.3i, 802.3u, 802.3x, 802.3az). Bandwidth 1 Gbps, industrial 2-pin DC socket input 9-30 VDC, aluminum housing.
Energy Meter: 7KT or Higher Version
Panel-mounted meter with screw terminals, 96×96×50 mm, IP65 front protection, LCD with bar graph, operating temperature ?20 to +60°C, humidity 0–95% non-condensing. Input voltage 480 V/276 V, nominal current 3 × 0-5 A with 20% overload, supports 1P2W, 3P3W, 3P4W networks, password protected.
Emergency Stop.
Selector Switch.
Push Button.
Lamp.
Slim Relay.
Control Panel.
Electromagnetic Flowmeter (2 pcs):
For water medium, unit m³/hr, ambient operating temperature, normal operating pressure, density 996 kg/m³, conductivity 20 ?S.
Pulsed DC/Dual Frequency excitation, fully welded flange & coil housing, serrated finish. Electrode SS316L, dual-compartment, PFA liner, SS304 tube. Accuracy ±0.35% flat across range. Integral mounting. Output 4-20 mA, HART, Pulse, Modbus. HART 7.0 or higher. Power supply 24 VDC and permissible load 600 ohm.
Industrial Grade Level Transmitter:
Process temp max +60°C, pressure max 3 bar, electronic module 2-wire 4-20 mA. NPT 1½" connection, measuring range up to 8 m, cable entry NPT ½", programmable with mobile device via UWT Level App.
Industrial Grade Level Switch:
Integral cable version, 2-wire 4-20 mA or transistor/relay. Sensor material PPS. Process connection ¾" NPT, stainless steel 316L. Warranty up to 6 years. Without cable entry.
Industrial Grade Pressure Transmitter:
Microprocessor-based 2-wire smart HART transmitter with silicon resonant sensor. Accuracy ±0.06% to ±0.2% of span. Output 4-20 mA HART 7. Rangeability 100:1 (20:1 below 2 kg/cm²). Long-term stability ±0.15%–±0.2% depending on range. Response time 90 mSec for >500 mmWC, 150 mSec for ?500 mmWC.
Industrial Grade Temperature Transmitter:
SMART 2-wire transmitter with universal input for Thermocouples (I/K/E/S) or RTD Pt100 (3-wire), outputs 4-20 mA. Includes digital local indicator (5-digit), bar graph, local operating switch. Input resistance 1K ohm or lower for mV signals, 10 ohm per wire for RTD. Power 16-30 VDC via safety barrier, 550 ohm load at 24 VDC, supports HART protocol.
Industrial Grade Pressure Gauge:
Direct bottom entry, 1/2" NPT(M), accuracy ±0.5% FS, knife-edge pointer, integral dampening screw (Monel/AISI316), external zero adjustment, IP67 enclosure, toughened glass, AISI 316 SS case and bezel.
Industrial Grade RTD:
Simplex Pt-100 element, Class A accuracy, range ?70 to 500°C, 3-wire system, SS316 sheath (3 mm), weatherproof IP67 die-cast aluminum head, ½" NPT(F) gland, threaded process connection ½" NPT(M), optional head-mounted transmitter (4–20 mA).
Pump 0.75 kW
Required Piping, Skid, Tank, Reservoir
SIMATIC STEP 7 Basic V20:
TIA Portal engineering software, floating license, supports S7-1200 and Basic Panels. Software/DVD, multilingual, compatible with Windows 10/11 and Windows Server.
SIMATIC WinCC Advanced V19:
Engineering software with floating license, USB license key, supports configuration of SIMATIC Panels and WinCC Runtime Advanced/Unified. Multilingual support.
SIMATIC WinCC Runtime Advanced 128:
Power Tags V17
Single runtime license, DVD with documentation and USB license key. Supports six languages.
Desktop Computer (02 Units):
Intel Core i5-14600K CPU, 16GB DDR5 6000MHz (2 pcs), 1TB NVMe SSD (KC3000 or equivalent), GIGABYTE Z790 motherboard or equivalent, MSI 850W 80+ Gold PSU or equivalent, HP 23-24" FHD IPS monitors, 1KVA UPS with 15–30 min backup, Thermaltake TOUGHAIR 710 cooler or equivalent, ATX casing, standard keyboard & mouse.
Accessories:
All necessary cables and connections included. One storage steel showcase and one computer table supplied. One piece each of PLC, HMI, Energy Meter, Level Transmitter, Level Switch, Pressure Transmitter, Temperature Transmitter, Pressure Gauge, and RTD included as per previous specifications.